Removing wrist band in following slow motion video
\n<\/span><\/p>\n0:06 hook pincer grip graps band reliably and firmly due to hook inherent reliable precision grip<\/p>\n
0:11 pull band out with care, allowing locking rod to disengage with the band’s perforation<\/p>\n
0:12 locking rod now disengaged with the band’s perforation<\/p>\n
0:16 What you need to understand: to make the band glide out of the lock with ease, the locking rod must be pushed aside and since the prosthesis is not able to do that at the same time, you need to use some other surface to accomplish this. The band’s surface just adjacent to the hole can be conveniently used for that. To get that, the band must be pulled sideways just a tad bit.<\/p>\n
0:28 rod tip lands on band surface adjacent to hole due to slightly pulling the wrist band sideways with the hook<\/p>\n
0:30-0:35 the band can be used to push the locking rod into an “open” position now<\/span><\/p>\npushing the wrist band open then does not cause the locking rod to engage with a band perforation, thus the wrist band has been efficiently opened and can be pulled or pushed out all the way if necessary; after that I am just playing with the lose band to show its free move in the wrist band lock<\/p>\n
Putting on and closing wrist band in following slow motion video
\n<\/span><\/p>\n1:34 the presence of a computer keyboard edge (or a table or a piece of wood or an upside down coffee cup or a camera case or whatever really) is required to push the locking rod end into the band perforation<\/p>\n
1:41 the locking rod is placed against the edge of the keyboard with the wrist band strap pulled up<\/p>\n
1:49 gently lowering the band will catch the rod into the perforation of the band and thus lock the wrist band lock<\/p>\n
1:52 this is a first variation, just look where it goes in and lock it there, or you can repeat the process to make it tighter<\/p>\n
1:57 the locking bar is pushed against the keyboard edge to move its end \/ tip into the band perforation, this goes until 2:04 or so<\/p>\n
![\"\"](\"https:\/\/www.swisswuff.ch\/tech\/wp-content\/uploads\/2008\/10\/bionic-hand-watch-band-attempt.gif\")
<\/a><\/p>\n